Description
Ford Edge Mileage Blocker sometimes is mentioned as: Can Emulator – Can Blocker – Mileage Freezer – Odometer stopper – Odometer freezer – Stop KM – Can Filter – Kilometer Filtern – Tachojustierer – Tacho Stopper – Tacho Blocker – KM Stop Freezer – Stop Mileage – Turn Off Speedometer – How to Stop My Mileage – Turn Off Odometer – Mileage Correction
FORD EDGE [CD539] (2015 – 2024) with 26-pin connector
✅ SPEEDOMETER AND ASSISTANCE SYSTEMS WORK ✅
Key features of our Mileage Freezer for Ford Edge:
- 100% untraceable and undetectable solution ✔️
- All modules in the car will show the same reduced mileage (odometer and all ECU’s) ✔️
- Fitting instructions and WhatsApp technical support provided ✔️
- Simple installation – doesn’t require cutting or soldering cables – plug and play solution ✔️
- No error messages in instrument cluster or navigation ✔️
- Original connectors and best quality workmanship ✔️
- Always saves the last setting. Does not need to be reactivated every time you start the car ✔️
Activation ✔️ and deactivation ❌ takes place via multiple operation of High Beam flasher (4-5 times)
🔹 Visual confirmation of the activation takes place in the instrument cluster by indicator light flashing 🔹 Nothing needs to be reset every time you start your journey 🔹 Activation and deactivation can take place at any time, both while driving or stationary.
For all other models of Ford and Ford Commercial vehicles in our offer click here
Functional sequence:
Mode 1 (1 blink of hazard lights) = odometer stopped; counts 0%, speedometer works as normal
Mode 2 (2 blinks of hazard lights) = odometer counts 10%, speedometer works as normal
Mode 3 (3 blinks of hazard lights) = odometer counts 50%, speedometer works as normal
Mode 4 (4 blinks of hazard lights) = back to default operation, odometer counts 100% as normal
Worldwide shipping – we process domestic and international orders daily – ship to Europe, United States, Canada, New Zealand, Russia, Japan, Taiwan and all over the world
What is Can Blocker and Canbus anyway? Canbus is the spinal cord that connects many modules or computers throughout your vehicle together and allows them to operate as a ‘cohesive’ team. Our devices include this same level of vehicle-wide computer integration as Electronic Control Units in your car. A Mileage Blocker with its Canbus connection can read virtually every set of data including critical internal calculations like fuel trims, driving speeds mileage data and change these values to suit your requirements.
At Mileage we strive to provide the best quality devices with genuine components originated form automotive industry. We do not sell Mileage Correction tools for Ford Mustang Mach-E as they could be meant for deceitful purposes and can falsify the odometer reading. They are usually used to clock/roll back the distance travelled by the super-car. However, modern cars have multiple data storage units and typical correction tools don’t cover all modules throughout the vehicle. Our Mileage Blocker deals with this issue and provides the same reading from all memories. We offer a wide variety of Mileage Blockers devices for various vehicles.
The Mileage Blocker tool works perfectly on a diesel and petrol engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The installation process isn’t very complex and does not require in-depth knowledge of a vehicle’s architecture. Plug it between the loom and the instrument cluster and you can enjoy all the benefits of our Mileage Stopper module. Ford Mileage Freezer can be activated or deactivated anytime, whether the car is in motion or stationary.
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.
Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% remains. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.
Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, the remaining 30% is equal to 9,000 km.
When the kilometre stopper is active, it automatically pushes the service back up to 90% i.e. to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.
Change modes via smartphone app or press the BC button for 10 seconds
Repeat the process to switch from mode to mode
All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.
Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.
Mode 2
No speed and the mileage counting is stopped for all vehicles
Mode 3
Speed display works and the miles count is reduced to 30%.
Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle
Mode 4
Speed display works and the miles count is reduced to 40%.
Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle
Mode 5
The kilometres are counted at 100%
The module is deactivated, the speedometer and the odometer work as usual.
BMW Z4 G29 Mileage Blocker tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.
Please note this device is designed and supplied only for off-road use and dyno testing. It cannot be used for fraudulent purposes i.e. use on the public roads
