Description
The mileage in Audi’s virtual cockpit may differ from the gearbox. Diagnostic testers can easily read the real data.
To synchronise the data, you need a Can Emulator. The Audi Can Emulator for Gearbox displays the same mileage on the speedometer and OBD scanners. Click on the following Product link
GEARBOX OBD EMULATOR FOR AUDI
AUDI Q3 – F3 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.
THIS DEVICE IS SUITABLE FOR ALL AUDI Q3 F3 MODELS THAT WERE RELEASED SINCE 2018
- Has multiple modes to choose from
- Easy DIY installation
- Mating face and Ridges on the connector guarantee a smooth installation process
- Easy to operate with several key combinations
- Doesn’t leave a trace if you remove it: no soldering or cutting of cables required
- No error messages displayed on the speedometer or navigation panel
- Comes with premium-quality plugs and heat-resistant cables
- Chosen settings are saved unconditionally
- After detaching the module, the mileage doesn’t increase spontaneously
- Speedometer and all the other assistance systems work flawlessly with virtual cockpit
- The ability to purchase with or without an app
- As soon as this device is activated, the engine control light may appear on vehicles from the end of 2020
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.
If your vehicle has recently received an update from the manufacturer, the previous activation method will not be applicable anymore. Only mode one (full stop) and mode four (full count) will work. To activate the module, you must switch off the vehicle completely five times in a row. After the purchase, you will receive a PDF file with further details.
AUDI Q3 SQ3 GA Virtual Cockpit 1 18 Pin
Press the OK button for 10 seconds. Repeat the process to switch from mode to mode.
These activations are for Virtual Cockpit 1 and without Virtual Cockpit.
Mode 1
The kilometres are counted at 0%
To stop the odometer at 100 %, you must activate mode 1 and switch the vehicle off for 2 minutes. The speed display no longer works above 40 km/h
Mode 2
20% of the actual mileage is recorded
The speed display and assistance systems operate without malfunction
Mode 3
30% of the actual mileage is recorded
The speed display and assistance systems operate without malfunction
Mode 4
100% of the actual mileage is recorded
The module is deactivated
AUDI Q3 SQ3 GA Digital 32 Pin
AUDI Q3 SQ3 GA Virtual Cockpit 2 32 Pin
Change modes via smartphone app or press the OK button for 10 seconds. Repeat the process to switch from mode to mode.
These activations are for Virtual Cockpit 2.
Mode 1
The kilometers are stopped at 100%
After activating MODE 1, the vehicle must be switched off for 3 minutes. Only then will MODE 1 be activated.
Mode 2
Only 20% of the actual mileage is recorded
The speed display and assistance systems operate without malfunction.
Mode 3
Only 30% of the actual mileage is recorded
The speed display and assistance systems operate without malfunction.
Mode 4
100% of the actual mileage is recorded
The device is switched off. The speed display and assistance systems operate without malfunction.
Audi Q3, F3 Mileage Blocker tool always keeps the last applied settings. For that reason, you don’t have to change the settings before starting a car next time.
The Mileage Blocker is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
