Description
BMW 2ER F22/F23/F45/F46/F87 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.
THIS DEVICE IS SUITABLE FOR ALL BMW 2ER F22/F23/F45/F46/F87 MODELS THAT WERE RELEASED SINCE 2013
- Do-it-yourself (DIY) installation
- The module has multiple modes
- If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
- Comes with high-quality plugs and heat-resistant cables
- No need to open ECUs
- Doesn’t leave a trace if you remove it: no soldering or cutting of cables required
- Easy to operate with several key combinations
- Automatic Service adjustment
- After removing the module, the mileage doesn’t increase spontaneously
- The diagnostic testers cannot discover the mileage altered by BMW 2er F22 / F23 / F45 / F46 / F87 Mileage Stopper
- Select settings once and they will be saved unconditionally
- Speed indicator and assistance systems work (only in certain modes)
- No error messages displayed on the speedometer or navigation panel
- Mating face and Ridges on the connector guarantee a smooth installation process
- The ability to purchase with or without an app
- No error messages from Blind Spot Assist or cruise control failure
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.
Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% remains. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.
Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, the remaining 30% is equal to 9,000 km.
When the kilometre stopper is active, it automatically pushes the service back up to 90% i.e. to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.
Change modes via smartphone app or press the BC button for 10 seconds
Repeat the process to switch from mode to mode
All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.
Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.
Mode 2
No speed and the mileage counting is stopped for all vehicles
Mode 3
Speed display works and the miles count is reduced to 30%.
Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle
Mode 4
Speed display works and the miles count is reduced to 40%.
Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle
Mode 5
The kilometres are counted at 100%
The module is deactivated, the speedometer and the odometer work as usual.
BMW 2er F22 / F23 / F45 / F46 / F87 Mileage Blocker tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.
The Mileage Blocker is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
