Skip to content
SKU N/A Category Tag

X6 G06

£250.00£293.00

THIS DEVICE IS SUITABLE FOR ALL BMW X6 G06 MODELS THAT WERE RELEASED SINCE 2019

 

  • Speed indicator and Assistance programs work (only in certain modes)
  • No error messages from Blind Spot Assist or cruise control failure
  • Do-it-yourself installation
  • Premium-quality plugs and heat-resistant cables
  • The ability to purchase with or without an app

Description

MILEAGE BLOCKER FOR BMW X6 G06

BMW X6 G06 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW X6 G06 MODELS THAT WERE RELEASED SINCE 2019
SPECIFICATIONS
  • DIY installation might take up to an hour
  • Has multiple modes
  • No error messages appear on the speedometer or navigation panel
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • Comes with premium-quality plugs and heat-resistant cables
  • Doesn’t leave a trace, no soldering or cutting of cables required
  • Easy to operate with several key combinations
  • No need to open ECUs
  • After removing the module, the mileage doesn’t increase spontaneously
  • The diagnostic testers cannot discover the mileage altered by BMW X6 G06 Mileage Stopper
  • Select settings once and they will be saved unconditionally
  • Speed indicator and assistance systems work (only in certain modes)
  • If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
  • Automatic Service adjustment
  • No error messages from Blind Spot Assist or cruise control failure
  • The ability to purchase with or without an app

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION FOR LIVE COCKPIT

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometres are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

BMW X6 G06  Mileage Blocker tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

ACTIVATION & DEACTIVATION FOR CURVED DISPLAY

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The Assistant systems might be unavailable temporarily.

Mode 1
1-2% of the mileage is counted, speed indicator works

The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
~30% of the mileage is counted, speed indicator works

The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
The kilometers are counted at 100% but the average consumption has stopped and is not increasing, speed indicator works

To keep the consumption balanced with the miles, you should regularly switch between modes 1 and 3. See video The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual. The indicator: Turn light x4 flashes only inside the vehicle

WARNING

The Mileage Blocker is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Cable Length

Long cable, Short cable