Skip to content
CLA Class
Category Tag

CLA Class

£229.00

Mercedes Mileage Blocker is an extraordinary device which can stop the mileage recording on a vehicle you owe. Such a device is useful if you wish to stop counting unnecessary miles while testing your car’s performance under different conditions. The main advantage of our mileage blocker is that it is 100% untraceable to people and sophisticated diagnostic equipment.

We introduce to our clients this product for Mercedes CLA designated for vehicles all over the world and you can simply stop miles/kilometres counting in these legendary cars. This device is compatible with below models:

 

🔹  MERCEDES CLA-CLASS [W117] (2013 – 2018)

 

Description

MILEAGE BLOCKER FOR MERCEDES CLA CLASS

Mercedes CLA Class Mileage Blocker sometimes is mentioned as: Can Emulator – Can Blocker – Mileage Freezer – Odometer stopper – Odometer freezer – Stop KM – Can Filter – Kilometer Filtern – Tachojustierer – Tacho Stopper – Tacho Blocker – KM Stop Freezer – Stop Mileage – Turn Off Speedometer – How to Stop My Mileage – Turn Off Odometer – Mileage Correction

 

MERCEDES CLA-CLASS [W117] (2013 – 2018)

SPECIFICATIONS

✅ SPEEDOMETER, CRUISE CONTROL AND LANE ASSIST SYSTEMS ALWAYS WORK  WITH THE MILEAGE FREEZER INSTALLED ✅ 

 

With this mileage stopper you will see how fast you drive on your instrument cluster with great accuracy. Assistance systems in the vehicle work: cruise control, ACC, lane departure warning

 

 

 Main features of your odometer stopper for Mercedes CLA-Class:

 

  • Plug and Play installation – no cutting cables or soldering ✔️
  • Access instrument cluster socket, disconnect main harness connector and connect the mileage freezer with the plug connectors ✔️
  • No error messages in instrument cluster or navigation ✔️
  • After removal of the device mileage doesn’t jump up ✔️
  • Board computer (average) consumption isn’t worked out correctly, but the fuel level display is 100% correct
  • Performance of mileage blocker is always untraceable ✔️
  • Speedometer and assistance systems work all the time ✔️
  •  

 

Activation ✔️ and deactivation ❌ by operation of BACK/HOME button on steering wheel 3 times in quick succession

 

🔹 Visual confirmation of the activation takes place in the instrument cluster by indicator light flashing

🔹 The Odometer Freezer always saves the last setting

🔹 Nothing needs to be reset every time you start your journey

🔹 Activation and deactivation can take place at any time, both while driving or stationary by press of the button on steering wheel


Worldwide shipping – we process domestic and international orders daily – ship to the whole of Europe, United States, Canada, New Zealand, Russia, Japan, Taiwan and all over the world  

 

 

FAQ – FREQUENTLY ASKED QUESTIONS

 

What is Mileage Blocker and Canbus? 

– Canbus is the spinal cord that connects many modules or computers throughout your vehicle together and allows them to operate as a ‘cohesive’ team. Our devices include this same level of vehicle-wide computer integration as Electronic Control Units in your car. A Mileage Blocker with its Canbus connection can read virtually every set of data including critical internal calculations like fuel trims, driving speeds mileage data and change these values to suit your requirements.

 

What happens if I remove the Mileage Blocker?

– There is no problem as the Mileage Blocker removes the distance driven unconditionally. The odometer figures will remain unchanged after discharge of the module from the car. Blocker mileage will not increase spontaneously after removing the module.

 

Are there any warning lights? 

– There are no error messages on the dashboard or instrument cluster of the car.  However, sometimes it is recommended to preventively delete any error codes from memory of the car after removal of Mileage Blocker. CAN Communication Network may occasionally save interruption messages as error messages. These are sporadic errors that do not need to be deleted, but it may be recommended.

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

SERVICE ADJUSTMENT

Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% remains. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.

Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, the remaining 30% is equal to 9,000 km.

When the kilometre stopper is active, it automatically pushes the service back up to 90% i.e. to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometres are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

BMW Z4 G29 Mileage Blocker tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

WARNING

This device is designed only for off-road use and dyno testing and not for fraudulent purposes i.e use on the public road

Related products